Profile Editor Upgrade to 2.8.1
(Note: This information is only for practitioners
who have the software. For end-users having IS02BA units, please contact your
practitioner about the upgrade. )
On 01/13/2010, Inspirstar Profile Editor Software
version 2.8.1 was released with the
following new features:
-> Support of 10 protocols on IS02BA.
-> Runtime current intensity increase/decrease on IS02BA.
-> Runtime frequency pair forward/backward on IS02BA.
-> Drag-drop support for profile/protocol files.
-> Improved Real Time Control Panel.
-> Updated documentations.
-> Improved easy of use and bug fix.
We suggest that all users upgrade the PC software to this
version. The new version of Profile Editor is backward compatible with your old
firmware and profile or protocol files.
The firmware in the IS02BA unit needs upgrade to firmware
version 0.80.1 to get the new IS02BA features.
(Note: If you are using Mac computer,
please do not do firmware upgrade on your Mac computer because of possible
incompatibility issue. Please use a Windows PC to upgrade the firmware or contact
Software/Firmware Upgrade Instructions
To Upgrade the software:
When you start Profile Editor software,
you should get the automatic update notice to update the software to version
2.8.1. Click "Yes, start Downloading" to download the update. After
the download is finished, you will be prompted for installation. If you don't
get the automatic update notice, you can click "Help"->"Check
for Updates" to
start the upgrade.
Windows Vista/Windows 7 users:
The automatic update does not work in Windows Vista/Windows 7 when the User Account
Control is on (default). You need to download the update manually to your computer
and install. Please contact Inspirstar.
To Upgrade the firmware on IS02BA:
1. After the software installation finishes,
open Profile Editor and connect IS02BA unit to the computer.
2. The firmware upgrade on step #3 will delete the current protocols in IS02BA
unit. You may need to backup those protocols from the unit
if you didn’t ever save a copy in your computer. Click the button “Read” and
after the profile is read from the unit, click “Save Profile As” to save it on
3. Firmware Upgrade. Click “Tools"-> "Firmware Upgrade”.
In Step 1, you should see this file.
In Step 2, Build Date should be Dec 22, 2009.
If both are correct, click “Start Upgrade”. (If not, use the button "Browse"
to locate the exact file. )
(Recommendation: Use new batteries for firmware upgrade.)
Note: For the operation of new features on IS02BA unit
or the use of software new version, please refer to the updated documents
Inspirstar IS02BA User's Manual and Inspirstar
Profile Editor User Guide,
by clicking your computer "Start"-> "All Programs" -> "Inspirstar" -> "Documents".